 | Recex® Square-Phillips Combination Recess Screw
This Recex® #2 Square-Phillips Combination Recess Screw is a thread cutting screw perfect for using in any wood. The special head allows it to predrill itself, making entry easy and without splitt.. Recex® Square-Phillips Combination Recess Screw |
|
 | Kreg® Maxi-Loc Hi-Lo Threads
Dual thread design makes this an all-purpose screw for a variety of wood species.
Self-tapping auger point
Flat head that seats flush
Uses a #2 square drive..Kreg® Maxi-Loc Hi-Lo Threads |
|
 | Decorative Hardware Screws
The perfect screw choice for decorative purposes such as cabinet or door hardware.
100 count packs
Choose from Nickel or Statuary Bronze
Available in 1/2'' or 3/4''
..Decorative Hardware Screws |
|
 | Seamaster Screws 305 Stainless
Repair your boat, decking, or other wet applications with Seamaster™ 305 Stainless Steel Screws and you'll never have to worry about rust!
Stainless steel coating give you a stronger screw an..Seamaster Screws 305 Stainless |
|
 | Flat Head Pozi Drive Euro Screws
Working with cabinet components using the European 32mm system? Then you're going to need Flat Head Pozi Drive Euro Screws!
Technical Details:
Meet exact sizing requirements for standard mounting h..Flat Head Pozi Drive Euro Screws |
|
 | Firmit Connecting Screws
Get a tight grip in softwood, particle board, and plywood used in knock-down or ready-to-assemble furniture with Firmit Connecting Screws! These screws come with a thread pattern that ensures maximum ..Firmit Connecting Screws |
|
|
|
 | Round Washer Recex Screws
General woodworking screw stays where you put it for tight, solid joint.
Type 17 self-drilling point makes for easy driving, less splitting
Lube finish reduces friction while driving
Deep thread..Round Washer Recex Screws |
|
 | GRK R4™ Multipurpose Star/Torx Screw
In addition to a Torx-head design that eliminates cam-out slippage, these
innovative self-countersinking
bits feature six cutting pockets beneath the head and sharp, saw-like
lower threads to driv..GRK R4™ Multipurpose Star/Torx Screw |
|
 | Square-X Drive Lube Finished Screws
Completely dry to the touch, the lube finish reduces friction for easier installation and protects the screws from surface rust. Square-X drive combines a square recess for non-slip fastening and Phil..Square-X Drive Lube Finished Screws |
|
 | Square Drive Lube Finished Screws
Completely dry to the touch, the lube finish reduces friction for easier installation and protects the screws from surface rust. Square Drive allows freedom from slippage and marring...Square Drive Lube Finished Screws |
|
|
|
 | Large Round Washer Head Screws
Washer head screw for drawer front adjustment has 1/2'' outside diameter that covers 5/16" adjusting hole once drawer front is positioned.
Type-17 point helps screw penetrate solid wood drawer fron..Large Round Washer Head Screws |
|
 | Slide Mounting Screws
Slide mounting screws for attaching ball bearing slides and catches (roller and magnetic) have low profile heads that won’t interfere with guide operation.
Thread design gives you substantial holdi..Slide Mounting Screws |
|
|
|
|
|
 | Panhead Face Frame Screw
This screw is lube finished and designed to eliminate splitting. Square drive head has a flat bearing surface, semi-elliptical top and self-tapping wood auger tip. It is designed to eliminate splittin..Panhead Face Frame Screw |
|
|
|
 | Hi-Lo Screws
No more stripped threads or pulling out on melamine or particleboard!
Hi-Lo screws grab the materiel for increased holding power. Two sizes. Color- Black.25 per pack. Optional
Bin Boxes are availa..Hi-Lo Screws |
|
|
|
 | Painted Head Screws
#10 x 3'' painted truss head screws are ideal for installing white melamine, painted plywood or natural woods. 25 Per Pack...Painted Head Screws |
|
|
|
|
|
 | Copper Guard™ Screws
An excellent deck screw that withstands the elements!
Organic polymer duplex coating provides optimum corrosion protection
Flathead with self-countersinking nibs
Patented Woodmax® cutter thre..Copper Guard™ Screws |
|
 | Threaded Inserts
Made from steel. Size listed is the size of the internal machine threads.
Sold in pack of 8.
Can be installed with screwdriver, threaded
insert wrench or threaded insert power drive tool...Threaded Inserts |
|
 | Teenuts
Drill a clearance hole for the threaded barrel; insert prong and hammer into place. It's that easy to install!..Teenuts |
|
|
|
 | Screw-On Teenuts
Screw-on flange assures positive resistance against rotation...Screw-On Teenuts |
|
|
|
 | Riveting T-Nuts and Inserting Tool
Revolutionary system eliminates push out problems. Put T-nuts in place without screws. Inserting tool flattens back of nut for secure fit. Riveting T-nuts available in three sizes for various thicknes..Riveting T-Nuts and Inserting Tool |
|
|
|
 | Low-Profile Threaded Insert
These low-profile threaded inserts work especially well on thin materials such as exposed veneer seating. The secret is in the "shouldered" edge, plus the 1/4-20 thread with a bolt stop feature that p..Low-Profile Threaded Insert |
|
 | L-Brackets Newel Kit for Stair Posts
Secure your newell post, hand rail, and balusters to your stairs and floor like they're set in cement! Trim parts available in Oak and Maple.
L-Bracket Fastening System with trim in your choice of Oa..L-Brackets Newel Kit for Stair Posts |
|
 | Baluster Fastening Kit with Driver
Baluster fastening kit with driver adds strength when fastening balusters to stairs and floors. Requires no gluing. Includes aluminum self-threading drill driver and four 1/4" steel dowel screws. Pack..Baluster Fastening Kit with Driver |
|
 | Stair Rail and Post Fastener
Stair Rail and Post Fastener:
Fastens hand rails to newel posts
Fastens newel posts to stair riser
Requires no glue, nails, or screws
Will not loosen over time
Includes lag bolt, washer, a..Stair Rail and Post Fastener |
|
 | Sure-Tite™ Newell Post Fastener
Sure-Tite™ newel post fastener requires no mortising or coping and provides superior lateral strength — won’t loosen over time! Installs in as little as 10 minutes! Includes 10-3/4" x 1/2" bolt,..Sure-Tite™ Newell Post Fastener |
|
 | Taper Connectors
Ideal bed rail fasteners. Excellent for very strong invisible joints. Also great for hanging wall units. ..Taper Connectors |
|
 | Exterior Woodmaster Square-X Screws & Kits
Premier quality wood screw with a durable Ultra Seal finish for tough exterior conditions. Rated for 500 hours of salt spray protection Maintains its silvery brilliance after years of exposure. Offers..Exterior Woodmaster Square-X Screws & Kits |
|
|
|
| Woodmaster Exterior Deck Screws
Woodmaster exterior screws are now offered in 500 packs for deck projects! Rated for 500 hours of salt spray protection Maintains its silvery brilliance after years of exposure. Offers excellent paint..Woodmaster Exterior Deck Screws |
|
|
|
 | Connector Bolts
Bronze finished steel bolts for joining wood together...Connector Bolts |
|
|
|
 | Cross Dowels
Use with connector bolts for making strong right angle joints. Use to make strong right angle joints. Dowel is steel, 16mm L x 10 mm. Shown with connector 1/4'' - 20 thread with 4 mm hex drive bolt (I..Cross Dowels |
|
 | Minifix (KD) Fittings
An ideal choice of knockdown fittings when clamping is difficult on large assemblies. This exceptionally strong mechanical fastener is great for both knock down fittings and permanent joints...Minifix (KD) Fittings |
|
|
|
 | Panel Connectors
Perfect for joining bookcases and entertainment center sections. Designed for
securing two panels of 3/4'' thick stock.
Requires 5mm hole.
8 per pack...Panel Connectors |
|
 | Cap Nuts for Connector Bolts
Cap nuts work with connector bolts for surface to surface application. Use these with connector
bolts. ..Cap Nuts for Connector Bolts |
|
 | Heavy-Duty Universal Connector
This universal connector is a heavy-duty cam-action fastener for extremely strong joints — it’s great for knockdown or permanent applications. Simply mount stud and drill holes! Cam is full 35mm ..Heavy-Duty Universal Connector |
|
 | Rockler Screw-Lube
Works like a charm to help lubricate and reduce binding on screws, drill bits and more. Also great for reducing friction on windows and drawers...Rockler Screw-Lube |
|
 | Screw Cap Covers
These plastic cap covers hide screw heads from view. Easy to use-- just pop
into place! Friction fit...Screw Cap Covers |
|
 | Veneer Screw Caps
Easily cover nail and screw holes with these 9/16 inch diameter unfinished veneer and melamine caps...Veneer Screw Caps |
|
 | Decorative Washers
Decorative washers can be used with #8 screws. Increases the holding powers
of the screws used...Decorative Washers |
|
 | Thread Detective Screw Gauge
Whether you’re trying to identify loose screws or you just want to figure out
which
nuts and bolts to use where, the Thread Detective is the perfect tool.
Available in
standard or metric, it fea..Thread Detective Screw Gauge |
|
 | Drill-Screw And Anchor Gauge
Accurately sizes wood, machine and masonry screws. Also sizes plastic, lead and hollow wall anchors, along with matching drill bits...Drill-Screw And Anchor Gauge |
|
 | Magnetizer / DeMagnetizer
You can drive screws easier in confined spaces after magnetizing them. Use the demagnetizing slot to make drivers and other tools safe around electronics...Magnetizer / DeMagnetizer |
|
|
|
 | Pro Grabit Pro-Grade Screw Extractor
Remove broken and damaged screws and bolts in two easy steps. Each of the four dualended
bits in this set feature a burnishing tip to prepare the screw or bolt for removal
and a threaded tip to grip..Pro Grabit Pro-Grade Screw Extractor |
|
