 | Undersized Router Bits
Specially designed to cut grooves and dadoes for plywood that measures less than its stated nominal thickness...Undersized Router Bits |
|
| Straight Router Bit
Top quality straight router bits that meet the high standards of Rockler Woodworking and Hardware. One of the most common router bits, straight router bits are used to cut grooves, dadoes, rabbets, an..Straight Router Bit |
|
 | Rockler 4-Pc. Straight Bit Set
Get maximum performance with Rockler’s top quality router bits!
Includes the most commonly used straight router bits.
Save more than $6 versus buying the bits separately.
Comes in convenient stor..Rockler 4-Pc. Straight Bit Set |
|
 | Spiral Mortising Router Bits
This Onsrud spiral router bit is perfect for cutting mortises. The up-cut design helps keep the mortise clear of chips and shavings while you cut. Available in high speed steel and solid carbide...Spiral Mortising Router Bits |
|
 | Onsrud Down-Cut Spiral Bits
Double-edge High Speed Steel spiral router bits provide a smoother finish when
trimming and sizing material.
Recommended when chip flow should be directed down to
protect the finish on top of t..Onsrud Down-Cut Spiral Bits |
|
 | Freud Up-Spiral Router Bits
Upward spiral is perfect for ejecting chips from mortises. It’s also the ideal bit for pattern routing because the best face goes down while cutting, with templates attached to the top. 1/2" shank.
A..Freud Up-Spiral Router Bits |
|
 | Freud Down-Spiral Router Bits
This premium solid carbide bit cuts dadoes with crisp, clean edges on both sides of the dado. The downward spiral forces the chips down into the groove, eliminating the tendency for wood fibers to chi..Freud Down-Spiral Router Bits |
|
 | Freud Double Compression Spiral Router Bit
The ultimate high-performance straight bit eliminates chipping on both sides of the workpiece. Ideal for pattern routing on double-sided panels, edgework, mortises and more. Solid Carbide. 1/2" shank...Freud Double Compression Spiral Router Bit |
|
 | Rabbeting Router Bits
Rockler rabbeting router bit includes bit and bearings for 5/16'', 3/8'', 7/16'' and 1/2'' rabbets. Allen wrench included. Vary cutting depth by changing bearings...Rabbeting Router Bits |
|
 | Freud Rabbeting Bits
Application: Joining boards and letting in back panels.
Produces super smooth cuts on both surfaces of the rabbet.
Steel pilots can be removed from bits and used with edge guides for wider rabb..Freud Rabbeting Bits |
|
 | Freud Double Flute Straight Bits
Application: General stock removal with a smooth finish.
Freud straight bits cut smoother than other bits because
of the precise shear and hook angles.
End of bit relief allows for fast plungin..Freud Double Flute Straight Bits |
|
 | Amana Straight Bit
This 2 flute straight router bit allows for greater balance and fine finish...Amana Straight Bit |
|
 | Rockler Rabbeting Bit Set
Carbide-tipped rabbeting router bit with four bearings allows you to cut 5/16", 3/8", 7/16 and 1/2" horizontally and up to 1" vertically.
Includes Allen wrench.
1-3/8" diameter.
1" height.
1/2" ..Rockler Rabbeting Bit Set |
|
 | Hinge Mortising Router Bits
Top quality bits that meet the high demands of Rockler Woodworking and Hardware...Hinge Mortising Router Bits |
|
 | Freud Mortising Bits
Application: Down shear works to eliminate
splintering ideal for hinges, mortises, and dadoes.
Freud’s Mortising Bits are designed with deep center.
gullets for maximum material removal withou..Freud Mortising Bits |
|
 | Amana Undersized Plywood Dado Bit
Use to cut dadoes and grooves for plywood, melaminie, MDF, flakeboard and other sheet materials where standard size router bits are too large...Amana Undersized Plywood Dado Bit |
|
 | Freud Stagger Bits
Application: Smooth, fast cutting in thick materials.
These bits combine the balance of a double fluted bit with the speed and versatility of a single flute tool.
#14-204 compression bit has oppos..Freud Stagger Bits |
|
 | Freud Flush Trim ''V'' Groove Bit
Application: Trimming laminated countertops and cabinets.
Adds small, decorative “V” groove while bringing a cabinet frame flush with the front of the cabinet, or trimming a laminated top. Cuts all ..Freud Flush Trim ''V'' Groove Bit |
|
 | Freud Panel Pilot Bits
Application: Template work & cutting openings
in paneling, siding, etc.
Freud’s Panel Pilot Bits will outlast high-speed
steel bits many times before sharpening. The drill
through point al..Freud Panel Pilot Bits |
|
 | Amana Panel Pilot Bit
Originally designed for the mobile home and R.V. industries, this panel pilot router bit plunges through material for fast cut out work...Amana Panel Pilot Bit |
|
| |
