Home     Information     Links     Contact

Nailers and Staplers

Porter-Cable FR350A Round Head 2-Inch to 3-1/2-Inch Framing Nailer 2-inch to 3-1/2-inch round head pneumatic framing nailer with 64 nail capacity magazine. Selectable trigger -- restrictive or contact actuation mode. 70-120 PSI operating pressure. Porter-Cable FR350A Round Head 2-Inch to 3-1/2-Inch Framing Nailer

Porter-Cable FR350MAG Round Head 2 3/8-Inch to 3-1/2-Inch Round Head Framing Nailer with Magnesium Housing The Porter-Cable FR350MAG Round Head 2-3/8-Inch to 3-1/2-Inch Round Head Framing Nailer with Magnesium Housing boasts an outstanding power to weight ratio at only 7.4 pounds. The nail lockout mechanism lets you know when it's time to reload the magazine, and the bypass nail pusher makes it a cinch to reload quickly. Porter-Cable FR350MAG Round Head 2 3/8-Inch to 3-1/2-Inch Round Head Framing Nailer with Magnesium Housing

Porter-Cable FCN200 Pneumatic Flooring Cleat Nailer Durable pneumatic floor nailer with 100 cleat magazine Compatible with L-shaped cleat nails from 1-1/2 to 2 inches 70-100 PSI operating pressure Porter-Cable FCN200 Pneumatic Flooring Cleat Nailer

Hitachi NT50AE2 3/4-Inch to 2-Inch by 18-Gauge Brad Nailer The NT50AE2 is the ideal 18-gauge finish nailers for trim work, furniture and other finish applications. It accepts 5/8- to 2-inch, 18-gauge fasteners. The new selective actuation switch lets the user easily select bump fire actuation for quick brad nailing when precise placement is not required. By simply flipping the switch, the user transitions to sequential fire for specific nail placement. Hitachi NT50AE2 3/4-Inch to 2-Inch by 18-Gauge Brad Nailer

Hitachi NT65A3 1-Inch to 2-1/2-Inch 16 Gauge Finish Nailer Selective trigger for single- and contact-actuation. 1-inch to 2-1/2-inch 16-guage nails for a wide variety of finish projects. Quick clear nose for less downtime and more productivity. Reduced distance between driving hole and nail, for minimal nail jams. Hitachi NT65A3 1-Inch to 2-1/2-Inch 16 Gauge Finish Nailer

Hitachi NR65AKS Strap-Tite 1-1/2-Inch to 2-1/2-Inch Positive Placement Nailer with Short Magazine This new Strap-Tite nailer from Hitachi makes metal connecting a breeze. The sleek and small design of the NR65AKS allows the tool to easily fit into the most awkard positions. Positive fastener placement is achieved by the nail tip protruding from the nose. Just place the nail tip into the correct position on the metal connector and fire. This tool weighs only 5.5 lbs. and accepts fasteners from 1-1/2" to 2-1/2" in length and .148 to .162 in shank diameter. Hitachi NR65AKS Strap-Tite 1-1/2-Inch to 2-1/2-Inch Positive Placement Nailer with Short Magazine

Hitachi NR83A2 Round Head 2-inch to 3-1/4-inch Framing Nailer Round-head 2-inch to 3-1/4-inch framing nailer allows for single or contact actuation. Tool-free depth adjustment, open-nose design; ANSI compliant. Stainless steel magazine, comfortable rubber grip. Hitachi NR83A2 Round Head 2-inch to 3-1/4-inch Framing Nailer

Hitachi NR90GR Round Head 2-inch to 3-1/2-inch Cordless Gas Framing Nailer Hitachi's new NR90GR cordless gas Full Round Head Framer has several key features. A double lock fuel rod door keeps the fuel rod secure and seated firmly, the elastomer grip provides extra comfort and the 7.2-volt battery charges in only 1-hour. The depth of drive is controlled by a tool free adjustment and the tool is design for perfect balance to reduce end user fatigue. The NR90GR can drive 1,200 nails per fuel rod and up to 2 nails per second. Hitachi NR90GR Round Head 2-inch to 3-1/2-inch Cordless Gas Framing Nailer

Hitachi NV45AB2S 7/8-Inch to 1-3/4-Inch Coil Roofing Nailer Powerful, lightweight, and well balanced nailer for roofing applications Adjustable depth of drive; bottom load magazine Lightweight and well-balanced Hitachi NV45AB2S 7/8-Inch to 1-3/4-Inch Coil Roofing Nailer

Hitachi NV45AB2 7/8-Inch to 1-3/4-Inch Roofing Nailer 7/8-inch to 1-3/4-inch roofing nailer; 120-nail capacity. Tool-free depth of drive adjustors; side-load magazine. Steel and rubber body protectors; carbide-tipped push level; rubber safety valve. Hitachi NV45AB2 7/8-Inch to 1-3/4-Inch Roofing Nailer

Hitachi NV65AH 2-1/2-Inch Coil Siding Nailer Hitachi 2-1/2-inch coil siding nailer operates at 70-120 psi; accepts plastic and wire collated nails. Tool free depth of drive adjustment; air deflector pivots 360 degrees; no-mar nose cap. Anodized aluminum and comfortable rubber grip. Includes safety glasses and 2 hex bar wrenches. Hitachi NV65AH 2-1/2-Inch Coil Siding Nailer

Hitachi NV75AG Round Head 1-3/4-Inch to 3-Inch Coil Framing Nailer The new NV75AG from Hitachi has a fastener capacity from 1-3/4 to 3 inches, shooting both plastic sheet coil and standard wire coil framing nails. The tool-less depth of drive allows you to accurately set the fastener depth. Hitachi has included a side load magazine with a tilt-out bucket to make fastener changes quick and easy. Hitachi NV75AG Round Head 1-3/4-Inch to 3-Inch Coil Framing Nailer

Grex P635 23-gauge 1-3/8-inch Length Headless Pinner The Grex P635 23-gauge 1-3/8-inch length headless pinner is the only industrial strength pinner offering a patented self-adjusting magazine that accommodates fasteners from 3/8-inch up to 1-3/8-inch, a total of nine different lengths. Equipped with an extended narrow nose to access corners and tight areas with precision, this lightweight pinner is designed ideally for intricate finishing and trim work that allows secure fastening of the smallest decorative trim with a nearly invisible hole - no splitting or puttying. Grex P635 23-gauge 1-3/8-inch Length Headless Pinner

GREX P645L 23 Gauge 1-3/4-Inch Length Headless Pinner with Lock-Out The GREX P645L 23 gauge 1-3/4¿ length headless pinner features Grex's patented self-adjusting magazine design that accommodates fasteners from 1/2¿ up to 1-3/4¿, a total of 12 different lengths. An added feature is the built in lock-out mechanism that prevents dry firing of the tool when only several pins are remaining, ensuring a pin is driven every time. If neccessary, a manual over-ride button of the lock-out mechanism allows the last few pins remaining in the magazine to be driven. GREX P645L 23 Gauge 1-3/4-Inch Length Headless Pinner with Lock-Out

GREX 1850 18 Gauge 2-Inch Length Brad Nailer Kit The GREX 1850 satisfies the general finishing needs of any workshop, by offering a large fastener range and an extended narrow nose to reach tight areas for detailed work. Although compact and lightweight in design, there is more than enough power to penetrate those long fasteners into hardwoods. GREX 1850 18 Gauge 2-Inch Length Brad Nailer Kit

DEWALT D51238K 5/8-Inch to 2-Inch 18-Gauge Brad Nailer Tool-free depth adjustment assists 360-degree exhaust channels air and dust away from user Overmolded no-mar pad allows greater visibility and durability DEWALT D51238K 5/8-Inch to 2-Inch 18-Gauge Brad Nailer

DEWALT D51321 Heavy-Duty 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer Pneumatic-bias feed piston for fast, reliable nailing in tough conditions. Tool-free depth adjustment, integrated jam clearing, and anti-skid pads for convenience. Magnesium body, carbide inserts in contact trip foot, and double O-ring design for durability. DEWALT D51321 Heavy-Duty 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer

Milwaukee 7110-20 2- to 3-1/2-Inch Clipped Head Framing Nailer 2- to 3-1/2-inch clipped head framing nailer with min. 70 PSI/max. 120 PSI. Collation angle 30 to 34 degress; air Inlet 3/8 inch NPT. Ultra-lightweight magnesium housing. Magazine capacity 66 to 82 nails; includes safety glasses, 2 ounces oil, 4- and 5-millimeter hex wrench. Milwaukee 7110-20 2- to 3-1/2-Inch Clipped Head Framing Nailer

Senco FinishPro 10 1/2-Inch to 1-Inch 23-Gauge Micro Pinner FinishPro10 drives a 23 gauge micro pins 1/2- to 1-inch. Includes case, fittings, repair tools, and oil. Features rear exhaust and easy fastener length adjustment. Soft grip handle and low load alert. Senco FinishPro 10 1/2-Inch to 1-Inch 23-Gauge Micro Pinner

Senco FinishPro 42XP 1-1/4-inch to 2-1/2-inch 15-gauge Finish Nailer with Case Extreme work calls for extreme tools, and the FinishPro 42XP is this tool. Replacing the work horse FinishPro 41XP, the FinishPro 42Xp has been redesigned with a new long life driver, new main body with improved durability, improved trigger ergonomics with reduced trigger reach. All backed by SENCO's NEW 5-year warranty. Fastener range: 1-1/4-inch to 2-1/2-inch 15-gauge angled fasteners. Senco FinishPro 42XP 1-1/4-inch to 2-1/2-inch 15-gauge Finish Nailer with Case

Senco 2K0103N FramePro 702XP FRH, Sequential Nailer Drives 2- to 3-1/2-inch smooth shank nails and 2- to 3-inch ring shank nails; shank diameters include .113, .120, .131, and .148. Upgraded XtremePro internal features include anodized sleeve for additional strength and durability, urethane sleeve cap protects sleeve from wear, and fixed firing valve to improve tool life and speed. 20-degree in-line magazine provides excellent maneuverability and line of sight. On-tool stowable rafter hanger. Thumbwheel depth-of-drive control and EZ-Clear. Senco 2K0103N FramePro 702XP FRH, Sequential Nailer

Senco RoofPro455XP Roofing Coil Nailer, Contact Actuation Drives 11 gauge (.120") , full round head roofing nails 3/4" 1-3/4" smooth shank.. 360 degree adjustable exhaust. Includes Case. Tool-free adjustable depth of drive for consistent and controllable nail set. Adjustable nail canister accommodates entire range of true round-head roofing nails. Senco RoofPro455XP Roofing Coil Nailer, Contact Actuation

Bostitch HP118K 23-gauge 1/2-inch to 1-3/16-inch Pin Nailer 1/2-inch to 1-3/16-inch 23-gauge pin nailer; low-profile nose-piece tapers for clear site. Adjustable high/lower power switch for depth control, longer life; holds up to 200 pins. Lightweight and durable aluminum housing. Bostitch HP118K 23-gauge 1/2-inch to 1-3/16-inch Pin Nailer

Bostitch BT125 5/8-Inch to 1-1/4-Inch 18 Gauge Brad Nailer 5/8-inch to 1-1/4-inch 18-gauge brad nailer kit Driving power: 145 in./lbs.; oil-free for reduced maintenance; no-mar tip Magnesium housing for a lightweight 1.9-pound brad nailer Bostitch BT125 5/8-Inch to 1-1/4-Inch 18 Gauge Brad Nailer

Bostitch N62FNK-2 15-Gauge 1-Inch to 2-1/2-Inch Angled Finish Nailer This finish nail driver comes in a magnesium housing, making it durable although it weighs only 3.8-pounds--the lightest angled finish nailer available. The tool's oil-free engine requires no lubrication and cannot stain work surfaces. It features 400-inch-pounds of driving power--the highest power-to-weight ratio available. Drives BFN-style finish nails from 1 to 2-1/2-inches long. tool-free removable magazine allows easy jam clearing and cleaning. Bostitch N62FNK-2 15-Gauge 1-Inch to 2-1/2-Inch Angled Finish Nailer

Bostitch F28WW Clipped Head 2-inch to 3-1/2-inch Framing Nailer with Magnesium Housing This new framing nailer drives 2- to 3 1/2-inch (.113 to.131-inch) framing nails. This lightweight tool is also one of the most powerful framers with 1050-inch-pounds of driving power. It is able to tackle even tough engineered lumber applications. Bostitch F28WW Clipped Head 2-inch to 3-1/2-inch Framing Nailer with Magnesium Housing

Bostitch F21PL Round Head 1-1/2-Inch to 3-1/2-Inch Framing Nailer with Positive Placement Tip and Magnesium Housing 1-1/2-inch to 3-1/2-inch framing nailer; 1,050 inch-pounds of driving power; sequential and bump trigger. 2 nailers in one: includes two quick-change nosepieces, converts to framing or metal connector applications. Lightweight magnesium housing; integrated rubber skid pads; rubber grip. Bostitch F21PL Round Head 1-1/2-Inch to 3-1/2-Inch Framing Nailer with Positive Placement Tip and Magnesium Housing

Bostitch N66C-1 1-1/4-inch to 2-1/2-inch Coil Siding Nailer with Magnesium Housing 1-1/4-inch to 2-1/2-inch coil siding nailer with 500-pounds of driving power Drives wire weld and plastic collated coil nails; tool-free depth adjustment; directional exhaust Lightweight, durable magnesium housing Bostitch N66C-1 1-1/4-inch to 2-1/2-inch Coil Siding Nailer with Magnesium Housing

Bostitch N80CB-1 Round Head 1-1/2 to 3-1/4-Inch Coil Framing Nailer Powerful coil framing nailer for framing, seathing, subflooring, roof decking, siding, and fencing. Contact-trip trigger; large-capacity magazine. Aluminum housing. Accomodates nails from 1-1/2 to 3-1/4 inches. Bostitch N80CB-1 Round Head 1-1/2 to 3-1/4-Inch Coil Framing Nailer

Bostitch MIIIFN 1-1/2- to 2-Inch Pneumatic Flooring Nailer 1-1/2-inch to 2-inch pneumatic flooring nailer for driving L-shaped flooring cleats. High-speed; extra-wide composite base; high-capacity magazine; 420 inch-pounds of driving power. Constructed of aircraft-grade aluminum. Includes rubber-tipped mallet. Bostitch MIIIFN 1-1/2- to 2-Inch Pneumatic Flooring Nailer

Porta-Nailer 461 1-Inch 18-Gauge Narrow (1/4-Inch) Crown Flooring Stapler Versatile hardwood flooring tongue and groove stapler. Precisely drives 1/4" crown staples at a 45 degree angle every time. Designed for installation of 3/8" and 1/2" hardwood and laminate flooring. Includes a conventional nose for use with many applications including face nailing, decorative trim, picture frame assemble, upholstering moldings and more. Porta-Nailer 461 1-Inch 18-Gauge Narrow (1/4-Inch) Crown Flooring Stapler

Porta-Nail 421P Pneumatic Floor Nailer with Both Line Nailer Shoe and Face Nailer Shoe Pneumatic floor nailer; easily adapts from line nailer shoe to floor nailer shoe; mallet activated. 4-1/2 cfm at 90 psi; oil-less system; holds up to 200 nails. Die-cast aluminum body. Includes nailer, mallet, face nail shoe, -instructional DVD, safety glasses, carry case. Porta-Nail 421P Pneumatic Floor Nailer with Both Line Nailer Shoe and Face Nailer Shoe

Porta-Nails 402P Porta-Nailer Manual Flooring Cleat Nailer Designed for angle nailing 5/8- to 1-inch tongue and groove hardwood flooring. Speed up the nailing process and insure the tightest floor possible with the Porta-Nailer hardwood flooring nailer. Besides tongue and groove flooring nail decorative paneling, sub-flooring, sheathing and roof decking. The unique "ratcheting ram" insures that the ram does not return until the nail is properly seated. Porta-Nails 402P Porta-Nailer Manual Flooring Cleat Nailer

Paslode Cordless 18-Gauge Finish Nailer #901000 5/8-inch to 2-inch 18 gauge cordless gas finish nailer. Depth-of-drive adjustment; high-visibility load magazine; long, narrow nose. Comfortable "sure grip" and soft trigger. Includes battery, charger, belt hanger, plastic carrying case, safety goggles, extra no-mar tip, Allen wrench. Paslode Cordless 18-Gauge Finish Nailer #901000

Paslode Cordless 16-gauge Angled Finish Nailer no. 900600 1-1/4-inch to 2-1/2-inch cordless 16-gauge gas angled finish nailer with non-mar tip and sight lines. Depth-of-drive wheel with probe position-indicator; locks tool at 10 nails to prevent blank firing. Comfortable in sure grip-inch and soft trigger. Includes nailer, battery, 2-hour charger. Paslode Cordless 16-gauge Angled Finish Nailer no. 900600

Paslode 902000 16 Gauge Straight Finish Nailer The Paslode cordless 16-gauge straight finish nailer no. 902000 drives 16gauge straight finish nails 3/4-inch - 2-1/2-inch. The Paslode cordless 16-gauge straight finish nailer no. 902000 includes a no-mar tip design that has sight lines to provide precise placement and prevent damage to expensive wood and a Reversible Belt Hook for left or right-handed users. The Paslode cordless 16-gauge straight finish nailer no. 902000 is a great addition for any professional or remodeler. Paslode 902000 16 Gauge Straight Finish Nailer

Paslode 501000 F-350S PowerMaster Plus Pneumatic Framing Nailer Powerful nailer with on-tool depth of drive adjustment. Lightweight and well balanced; rafter hook and measuring rule on the magazine. Drives framing nails from 2- to 3-1/2-inches long. Designed for all-weather use. Paslode 501000 F-350S PowerMaster Plus Pneumatic Framing Nailer

Makita AN901 Round Head 1-3/4-Inch to 3-1/2-Inch Coil Framing Nailer The built-in ceramic air filter system prevents debris from entering the tool extending tool life and reducing down time and the 9 quick-dial depth adjustment settings give you precise control of nail depth. You'll enjoy how the easy to load canister holds 1-3/4" to 3-1/2" coil framing nails and the non-slip nose is the ideal shape for diagonal nailing. Makita AN901 Round Head 1-3/4-Inch to 3-1/2-Inch Coil Framing Nailer

These products are sold by amazon.com. For information or to place an order click the link.

     Cabinets     Chests     Tables     Shelves     Outdoor     Hardware     Finishing     Tools     Plans     Books