 | 18'' Universal Track for Magswitch Workholding System
The Magswitch Universal Track brings an endless list of safety and efficiency possibilities to your work shop! Employing patented Magswitch Technology that uses incredibly strong magnets (sold separat..18'' Universal Track for Magswitch Workholding System |
|
 | Magswitch® Workholding System Starter Kit
Give your wood shop a new dimension in safety and control with the Magswitch® Workholding System Starter Kit.
Includes:
Universal Base that is compatible with a variety of Magswitch products
Revers..Magswitch® Workholding System Starter Kit |
|
 | Magswitch® Reversible Featherboard Attachment
Untitled Document
Eliminate kickbacks and the twisting of your stock while ripping, joining, or routing with the Magswitch® Reversible Featherboard Attachment. Used with the Magswitch® ..Magswitch® Reversible Featherboard Attachment |
|
 | Magswitch® Workholding System Universal Base
The heart of the Magswitch® Workholding System, the Universal Base is a jack-of-all trades jig for every serious woodworker. Use it with the Featherboard (34782), the Thin Stock Jig/Rip (36835), or an..Magswitch® Workholding System Universal Base |
|
 | Magswitch® Ultimate Thin Stock Jig/Rip Guide Attachment
Free your hands and keep your fingers safe when ripping stock as thin as 1/8". The Magswitch® Ultra Thin Stock Jig/Rip Guide Attachment features a stepped side with preset board thickness sizes of..Magswitch® Ultimate Thin Stock Jig/Rip Guide Attachment |
|
 | GRR-Ripper GR200 System
Far more than an ordinary push block, the GR200 is a highly evolved workpiece support system that enables you to safely rip strips as thin as 1/4", resaw, rip small or angled pieces, short offcuts and..GRR-Ripper GR200 System |
|
 | Micro Jig GRR-Ripper™ Handle Bridge
Provides four contact points to apply more downward pressure across the entire width of the Micro Jig GRR-Ripper™ body for better control. Also includes replaceable push foot. Easily installs to..Micro Jig GRR-Ripper™ Handle Bridge |
|
 | Feather Loc Value Kit
Amp up the safety factor in your shop with this value-priced 3-pack from Bench Dog Tools!
You get:
One Blade-Loc for safer blade changes
Two Feather-Loc featherboards to protects your hands during ..Feather Loc Value Kit |
|
 | Loc-In ™ Child Safety Locking Outlet Plug
Loc-In™ keeps your baby monitor or any appliance plugged in until you decide to unplug it – eliminating accidental unplugging! Permanently attaches to any power cord and then locks to your wall ..Loc-In ™ Child Safety Locking Outlet Plug |
|
 | SafetyGate™ Consumer Retrofit Restart Protection Electrical Plug
Prevent dangerous restarts of a host of different devices in your home. When
there is an interruption in the power supply to your device, SafetyGate™ prevents a
spontaneous restart of your dev..SafetyGate™ Consumer Retrofit Restart Protection Electrical Plug |
|
|
|
 | Kreg Multi-Purpose Push Stick
Add convenience to every cut you make with this push stick. A built-in storage magnet lets you attach it directly to your saw so it’s always accessible. The ergonomic handle provides the best angle fo..Kreg Multi-Purpose Push Stick |
|
 | Push Block with Angled Handle
A more comfortable way to guide stock through your saw! The ergonomic
handle is pitched at just the right angle for a safe, natural grip throughout
the cut. And with the rubber friction pad maint..Push Block with Angled Handle |
|
 | Bench Dog® Ultra Push-Bloc™
Get maximum gripping power on stock when ripping, jointing, or routing with the Bench Dog® Ultra Push-Bloc™. The bottom features the same gripping rubber surface found on our popular Patent ..Bench Dog® Ultra Push-Bloc™ |
|
 | ZeroPlay™ Guide Bar System
Each guide bar is composed of two interlocking plastic bars that adjust laterally to the
exact width of your miter slot to stabilize your jigs. Guide bars are easily calibrated
from the top of jigs ..ZeroPlay™ Guide Bar System |
|
 | ZeroPlay™ Guide Bar
Each guide bar is composed of two interlocking plastic bars that adjust laterally to the
exact width of your miter slot to stabilize your jigs. Guide bars are easily calibrated
from the top of jigs ..ZeroPlay™ Guide Bar |
|
 | ZeroPlay™ Stop
More than just a miter stop! Small and versatile, this stop can also lock a jig in place
or serve as a lock to secure a hold-down clamp (not included) in the miter slot. Fits
standard 3/4" x 3/8" mi..ZeroPlay™ Stop |
|
 | Splitter Steel Pro System, Thin Kerf
Made to handle professional use, even with heavy panels and dense solid wood.
Splitters have a tough steel core and are coated in transparent polycarbonate. For use
on your table saw only with a Zer..Splitter Steel Pro System, Thin Kerf |
|
 | Splitter Steel Pro System, 1/8'' Kerf
Made to handle professional use, even with heavy panels and dense solid wood.
Splitters have a tough steel core and are coated in transparent polycarbonate. For use
on your table saw only with a Zer..Splitter Steel Pro System, 1/8'' Kerf |
|
 | GRR-Ripper® Side Leg
1/8" side leg attachment easily installs to the GRR-Ripper® System (sold separately)
with included hardware, creating a 3/8" tunnel to enable table saw rips as thin as 1/8".
Tunnel height is 1/2..GRR-Ripper® Side Leg |
|
 | Micro Kerf Splitter Kit for Micro Kerf Blade
Rigid stainless steel splitter attaches easily to the zero clearance insert on your table
saw to add safety while sawing with the Micro Kerf Blade (33300, sold separately). Kit
includes the splitter..Micro Kerf Splitter Kit for Micro Kerf Blade |
|
 | Bench Dog ProRiser Profence Height Extender
With ProRiser, you can extend the height of your fence to whatever dimension you like! Just slide the ProRiser brackets into the rear T-slot of your Profence and add a piece of 3/4" thick stock. The s..Bench Dog ProRiser Profence Height Extender |
|
 | Bench Dog Universal Feather-Loc
Feather-Loc with universal bracket allows attachment to a shop-made clamping board for positioning anywhere on the table. Also allows use of Feather-Loc on machines with non-standard miter slots...Bench Dog Universal Feather-Loc |
|
 | Table Featherboard
Table featherboard is ideal for use with any tool that has a standard 3/8" x 3/4" miter slot. Expandable miter track bars provide maximum holding power. 5" max. adjustability...Table Featherboard |
|
 | Plastic Magnetic Push Stick
Ergonomically-designed handle is easy on your hand, and the magnet
allows you to store it right by your table so it’s always handy.
Plastic blade provides excellent stock support.
With angled ti..Plastic Magnetic Push Stick |
|
 | The Hand Guard™ Push Block
Adjustable, replaceable heel lets you safely push
different wood thicknesses on the table saw - as seen on The New Yankee Workshop! Unlike wood push sticks, this unique safety tool has self-lubricati..The Hand Guard™ Push Block |
|
|
|
 | Fence Featherboard
Fence featherboard works for both infeed and outfeed applications. Mounts with heavy-duty 5/16"-18 T-bolts (included) and fits all Rockler T-slot fences. For material up to 1-1/8" thick...Fence Featherboard |
|
 | GRR-Ripper™ Adjustable Push Block
The GRR-Ripper lets you feed both sides of a workpiece parallel through the saw blade and eliminates bare hand feeding...GRR-Ripper™ Adjustable Push Block |
|
 | GRR-Ripper® Instructional DVD
Covers over 30 applications of the GRR-Ripper system on four different machines: table saw, router, jointer and band saw.
120 minutes...GRR-Ripper® Instructional DVD |
|
 | Deluxe 4-Piece Router Accessory Kit
Here is the perfect accessory kit for our extra-tall Deluxe Router Fence (30136) — featuring a matching 3" tall featherboard to keep stock flat against the fence. Makes quick, safe work of raising pan..Deluxe 4-Piece Router Accessory Kit |
|
 | Magswitch Magnetic Table Saw Featherboards
These magnetic featherboards deliver fast, easy setup and adjustment anywhere on a steel table — you’re not limited to miter slot locations! Patented Magswitch technology allows powerful magnetic forc..Magswitch Magnetic Table Saw Featherboards |
|
 | Rockler Double Featherboard Kit
Holds wood snug against fence for a safer and cleaner cut when ripping, routing, drilling and more. Allows featherboard to apply pressure at the table level and at the top of the router tabl..Rockler Double Featherboard Kit |
|
 | Table Saw Pop-In Splitter
Improve Table Saw Safety! This affordable splitter system is simple to use, exact and extremely effective!
Produces virtually burn-free cuts!..Table Saw Pop-In Splitter |
|
 | Magswitch Vertical Featherboard Attachment
For use with the pro table featherboard (#39194) to apply firm downward pressure on workpiece for added safety.
Suitable for use on table saws, jointer tables, band saws, shaper tables and any other ..Magswitch Vertical Featherboard Attachment |
|
 | Magswitch Universal Featherboard
Magswitch’s most requested product is finally here — the Magswitch Universal Featherboard. Double-sided design allows you to use it for either infeed or outfeed applications, regardless of which way t..Magswitch Universal Featherboard |
|
 | Rockler Retrofit Double Featherboard Kit
Easily increase your featherboard height for vertical routing operations. Combine with Rockler table featherboard (#53677) to make a double featherboard for applying pressure at the table le..Rockler Retrofit Double Featherboard Kit |
|
 | Magswitch Magnetic Fence Featherboard
This magnetic fence featherboard delivers fast, easy setup and adjustment anywhere on a steel fence — you’re not limited to miter slot locations! Patented Magswitch technology allows powerful magnetic..Magswitch Magnetic Fence Featherboard |
|
 | Grip Tite Magnetic Feather Board
Only takes a few seconds to position quickly and easily! With
a strong magnetic base, you’re assured of a safe, reliable hold through the
entire cut!..Grip Tite Magnetic Feather Board |
|
 | 4-Piece Safety Kit
Includes
Rockler’s exclusive magnetic push stick with ergonomic handle
for table saw and router table use; 2 angled push blocks for jointer
and router table app..4-Piece Safety Kit |
|
 | Waist Apron
100% Cotton 13 Oz. Canvas, 13 Pockets and 2 tool loops. Adjustable 1'' wide waist strap. Brown with green strap and trim...Waist Apron |
|
 | Bib Apron
Keep everything you need close at hand with this 16-pocket super bib apron.
Made from durable cotton canvas, it features fully adjustable neck and belt
straps, a dual hammer loop, bar tacked seams..Bib Apron |
|
 | Cross-Back Shop Apron
NEW! Rockler exclusive cross-back shop apron.
Rockler has taken a good design and made it better! This shop apron features a cross-back design that takes the pressure off your neck and distributes i..Cross-Back Shop Apron |
|
 | Long Leather Shop Apron
Loaded with pockets to keep your shop essentials close at hand!
Two upper pockets are great for safety glasses, pencils and tape
measure.
Two deep lower pockets have cover flaps to prevent sawdu..Long Leather Shop Apron |
|
 | Denim Woodturner's Apron
Stay safe while turning! Heavy-duty, comfortable design protects you from flying
chips and shavings, and keeps dust from getting into your shirt...Denim Woodturner's Apron |
|
 | Woodturner's Leather Apron
Stay safe while turning! Heavy-duty, comfortable design protects you from flying chips and shavings, and keeps dust from getting into your shirt...Woodturner's Leather Apron |
|
 | Skins Gloves
Gloves fit like a durable, flexible additional layer of skin, giving you maximum dexterity
and superb feel for detailed and rugged tasks such as construction, lumber work, glass
and metal work, asse..Skins Gloves |
|
 | Flexx-Rap® Finger Protection Wrap
Flexible wrap helps protect fingers from burns and blisters, plus improves
grip.
Simply wrap tape around the joint of any finger; release tension
on the last section of wrap and press firmly ag..Flexx-Rap® Finger Protection Wrap |
|
 | Board Buddies® Anti-Kickback Hold Down
Maintain even pressure against the table and fence for safe, clean cutting on
table saws and router tables. Shown with optional track.
..Board Buddies® Anti-Kickback Hold Down |
|
 | Panel-Loc™ Panel Cutting Guide
The ultimate panel cutting accessory! Developed by acclaimed woodworker
Lonnie Bird, Panel-Loc is a combination hand guard and panel hold-down
that provides safer and better cuts when routing rais..Panel-Loc™ Panel Cutting Guide |
|
 | Magnifying Tweezers
Find and remove splinters. Great for your tool box! Precision sharpened sure-grip tips Stainless SteelDouble adjustable 5X Power MagnifierBlack..Magnifying Tweezers |
|
|
|
 | Rockler Anti-Slip Coating
Adding safety and security to areas from floors to miter fences is as easy as painting with our Anti-Slip Coating...Rockler Anti-Slip Coating |
|
 | Maghook Magnet Hook
Woodworkers will find endless uses for the new Maghook, featuring the same switchable magnet technology found in other Magswitch products. Ever wish you had a hook on your table saw for wrenches and p..Maghook Magnet Hook |
|
 | Electronic Ear Protector
Protect your hearing around noisy workshop machinery and still hear normal conversation. If a loud noise occurs, system automatically muffles the sound!
..Electronic Ear Protector |
|
|
|
 | Hearing Protectors
Using patented technology developed at Syracuse University, these lightweight ''on
ear'' foam protectors allow the wearer to block damaging noise while still hearing
useful sounds like speech and wa..Hearing Protectors |
|
 | Disposable Ear Plugs
Protect your hearing in the shop!
80 pair of disposable ear plugs come in convenient storage container that hooks on shop wall.
Ultra-soft foam provides a comfortable fit.
With noise reduction ra..Disposable Ear Plugs |
|
 | 3M Tekk Protection Professional Multipurpose Respirator
Protect your lungs without hindering your ability to get the job done! Made by 3M, the Tekk Protection Professional Multipurpose Respirator weighs just over a pound yet filters at least 99.7% lung pro..3M Tekk Protection Professional Multipurpose Respirator |
|
|
|
 | FastCap Pocket Dust Mask, 10-Pack
The MXV Pocket Dust Masks from FastCap combine a superior filtration system
with a collapsible design that slips easily into a shirt pocket—ideal for general purpose
use. The exhale valve on the fro..FastCap Pocket Dust Mask, 10-Pack |
|
 | Dust Mask 10-Pack
MXV dust masks are perfect for general purpose, non-toxic applications where dust and particles are present. Easy Breathe exhale valve keeps the dust out and helps prevent fogging of your safety glass..Dust Mask 10-Pack |
|
 | Power Air Respirator
One of the most comfortable power respirators on the market
at a great low price!
Powered air purifying respirator offers easy breathing by automatically drawing in fresh air while protecting fr..Power Air Respirator |
|
 | Dust Bee Gone Mask
Reusable and washable dust mask won’t fog glasses - perfect for woodturners!
Lightweight, comfortable design forms to all face shapes.
Effective down to 3 microns...Dust Bee Gone Mask |
|
 | Paint Spray Respirator
Suitable For: Lacquer & Enamel Paints, Pesticides, Welding, Dusts, Non-Oil Mists & Radon Daughters...Paint Spray Respirator |
|
 | Standard Impact Goggles
Keep your eyes safe from flying debris while cutting, sanding, routing, and more. These Standard Safety Goggles feature clear lens with an adjustable strap for personalized comfort, and side vents for..Standard Impact Goggles |
|
 | Women's and Youth CatEyes Safety Glasses
Attention Ladies! Your search for superior quality safety glasses is over! CatEyes Safety Glasses don't just look good and feel good, they have shatterproof, anti-fog wrap-around lenses that give you ..Women's and Youth CatEyes Safety Glasses |
|
 | Tinted Diopter 2.0 Safety Glasses
Tinted, wrap-around safety glasses contain built-in 2.0 diopter focal zones in the lower
portion of each lens. The lightweight frame features a comfortable bridge piece and ear
pieces. Lenses are sh..Tinted Diopter 2.0 Safety Glasses |
|
 | Mirrored Safety Glasses
Comfort, style and a mirrored look are added features to this set of ANZI Z87.1
standard protective lenses. Shatter-proof, wrap-around polycarbonate lenses block a
majority of UVA and UVB rays. Leng..Mirrored Safety Glasses |
|
 | Tinted Anti-Fog Safety Glasses
Enjoy the benefit of tinted wrap-around polycarbonate lenses that boast anti-fog
protection and a sleek, stylish design. Light frame features a comfortable bridge piece.
Glasses are ANSI Z87.1 rated..Tinted Anti-Fog Safety Glasses |
|
 | FastCap Bifocal Safety Glasses
Start seeing better results today! If you’re straining to read small measurements, but
don’t need constant vision correction, these bifocal magnifiers could be the perfect
solution. Sleek, lightweig..FastCap Bifocal Safety Glasses |
|
 | FastCap Safety Glasses
Sleek, lightweight and designed for comfort, these wrap-around glasses keep your
eyes safe and your vision clear. Features include: adjustable bands, rubber nose pads
and shatter-proof polycarbonate..FastCap Safety Glasses |
|
 | FastCap Safety Goggles
Keep dust and debris out of your eyes with these sleek foam-rimmed goggles. They
create a near-total seal while still allowing for good air-flow, ensuring safety and
comfort at the same time. Featur..FastCap Safety Goggles |
|
 | 3M™ TEKK Protection™ Professional Face Shield
Get full face protection from flying debris and dangerous chemical splashes with a 3M™ TEKK Protection™ Professional Face Shield! Features a high-strength, thermoplastic shield with a ratc..3M™ TEKK Protection™ Professional Face Shield |
|
 | Safety Face Shield
Get an excellent view of your workspace while protecting your eyes
and face with this his full-coverage Face Shield. Ideal for turning!
Durable safety plastic shield is 15" wide x 8-1/4"high
Adju..Safety Face Shield |
|
 | Hands Free Magnifier
Zeroes in on details while saving your eyes from strain. Works great with or without prescription glasses...Hands Free Magnifier |
|
 | Safety Glasses
Eye protection for your most valuable asset! Made by Smith and Wesson. Get high-quality protection for your eyes. Polycarbonate lenses exceeds ANSIZ87.1 industrial standards. Non-slip rubber nose pad ..Safety Glasses |
|
 | Trend® Airshield
Lightweight battery-powered face shield circulates air while protecting your eyes and face from small debris such as wood particles and wood shavings — ideal for routing and woodturning...Trend® Airshield |
|
 | Splinter Out™ Splinter Removers
Individually wrapped removers are sterile and ready to use. A tri-bevel micro sharp
point works better than the round point of a needle for loosening and pulling out
wood, glass and metal splinters...Splinter Out™ Splinter Removers |
|
